Outline of Railroad History

Roads of rails called Wagonways were being used in Germany as early as 1550. These primitive railed roads consisted of wooden rails over which horse-drawn wagons or carts moved with greater ease than over dirt roads. Wagonways were the beginnings of modern railroads.

By 1776, iron had replaced the wood in the rails and wheels on the carts. Wagonways evolved into Tramways and spread though out Europe. Horses still provided all the pulling power. In 1789, Englishman, William Jessup designed the first wagons with flanged wheels. The flange was a groove that allowed the wheels to better grip the rail, this was an important design that carried over to later locomotives.

The invention of the steam engine was critical to the invention of the modern railroad and trains. In 1803, a man named Samuel Homfray decided to fund the development of a steam-powered vehicle to replace the horse-drawn carts on the tramways. Richard Trevithick (1771-1833) built that vehicle, the first steam engine tramway locomotive. On February 22, 1804, the locomotive hauled a load of 10 tons of iron, 70 men and five extra wagons the 9 miles between the ironworks at Pen-y-Darron in the town of Merthyr Tydfil, Wales to the bottom of the valley called Abercynnon. It took about two hours.

In 1821, Englishman, Julius Griffiths was the first person to patent a passenger road locomotive.

In September, 1825, the Stockton & Darlington Railroad Company began as the first railroad to carry both goods and passengers on regular schedules using locomotives designed by English inventor, George Stephenson. Stephenson's locomotive pulled six loaded coal cars and 21 passenger cars with 450 passengers over 9 miles in about one hour.

Types of Locomotives

The steam-powered locomotive played a key role during the development and golden age of railroading, but, despite its long and picturesque history, it has been superseded in developed nations by electric and diesel-electric locomotives for economic and environmental reasons. The few steam locomotives that remain in operation in developed nations are mostly nostalgic relics used chiefly to pull tourist trains.

Steam Locomotives

The reciprocating steam locomotive is a self-contained power unit consisting essentially of a steam engine and a boiler with fuel and water supplies. Superheated steam, controlled by a throttle, is admitted to the cylinders by a suitable valve arrangement, the pressure on the pistons being transmitted through the main rod to the driving wheels. The driving wheels, which vary in number, are connected by side rods. Steam locomotives are usually classified under the Whyte system, that is, by the number and arrangement of the wheels; for example, an engine classified as 2–6–0 has one pair of wheels under the front truck, three pairs of coupled or driving wheels, and no wheels under the trailing truck. In some cases the truck wheels of the tender (fuel carrier) are added.

Richard Trevithick 1771 - 1833

Richard Trevithick's invention is considered the first tramway locomotive, however, it was a road locomotive, designed for a road and not for a railroad. However, Trevithick's accomplishments were many and the inventor did not fully recieve the credit he was due during his lifetime.  "I have been branded with folly and madness for attempting what the world calls impossibilities, and even from the great engineer, the late Mr. James Watt, who said to an eminent scientific character still living, that I deserved hanging for bringing into use the high-pressure engine. This so far has been my reward from the public; but should this be all, I shall be satisfied by the great secret pleasure and laudable pride that I feel in my own breast from having been the instrument of bringing forward and maturing new principles and new arrangements of boundless value to my country.

MINI TRAIN

If visiting TMII, in Jakarta Indonesia do not forget to take this mini train. while enjoying the beauty around TMII

Locomotif Ancient Steam

Ancient steam Locomotif Lempuyangan station Yogyakarta Indonesia, as a monument and symbol of the office Lempuyangan Station. Locomotif now is located at the entrance station Tugu Yogyakarta

Railroad History

"The time will come when people will travel in stages moved by steam engines from one city to another, almost as fast as birds can fly, 15 or 20 miles an hour.... A carriage will start from Washington in the morning, the passengers will breakfast at Baltimore, dine at Philadelphia, and sup in New York the same day.... Engines will drive boats 10 or 12 miles an hour, and there will be hundreds of steamers running on the Mississippi, as predicted years ago."
--Oliver Evans, 1800

Important milestones in English and American railway development

1630:	Beaumont designs and builds wagon roads for English coal mines using heavy planks on which horses pulled carts and wagons.
1753:	First steam engine arrives in the colonies from England.
1755:	First steam engine in America is installed to pump water from a mine.
1758:	An Act of Parliament establishes the Middleton Railway in Leeds. Thus the Middleton claims to be the oldest Railway in the world.
1769:	Frenchman Nicholas Cugnot builds a steam carriage.
1774:	Scotsman James Watt builds first "modern" stationary steam engine.
1776:	English tram road is laid down with cast iron angle bars on timber ties.
1784:	Murdoch (Watt associate) steam engine model runs 6 to 8 mph.
1789:	Englishman William Jessup designs first wagons with flanged wheels.
1800:	Oliver Evans, an American, creates the earliest successful non-condensing high pressure stationary steam-engine.

Sugarcane Train Sondokoro, Tasikmadoe Karanganyar Solo Central Java Indonesia

If you walk into the town of Solo / Surakarta (approximately about 15-30 minutes from the city of Solo to the Karanganyar / Tawangmangu) do not forget to stop at the Tasik Madoe Sugar Factory. In addition to looking at the sugar-making process you can also enjoy the trip with this train.

The History of Railroad Innovations

Roads of rails called Wagonways were being used in Germany as early as 1550. These primitive railed roads consisted of wooden rails over which horse-drawn wagons or carts moved with greater ease than over dirt roads. Wagonways were the beginnings of modern railroads.

By 1776, iron had replaced the wood in the rails and wheels on the carts. Wagonways evolved into Tramways and spread though out Europe. Horses still provided all the pulling power. In 1789, Englishman, William Jessup designed the first wagons with flanged wheels. The flange was a groove that allowed the wheels to better grip the rail, this was an important design that carried over to later locomotives.

The invention of the steam engine was critical to the invention of the modern railroad and trains. In 1803, a man named Samuel Homfray decided to fund the development of a steam-powered vehicle to replace the horse-drawn carts on the tramways. Richard Trevithick (1771-1833) built that vehicle, the first steam engine tramway locomotive. On February 22, 1804, the locomotive hauled a load of 10 tons of iron, 70 men and five extra wagons the 9 miles between the ironworks at Pen-y-Darron in the town of Merthyr Tydfil, Wales to the bottom of the valley called Abercynnon. It took about two hours.

In 1821, Englishman, Julius Griffiths was the first person to patent a passenger road locomotive.

The History of Steam Engines

Inventors: Thomas Savery, Thomas Newcomen, James Watt

Thomas Savery (1650-1715)

Thomas Savery was an English military engineer and inventor who in 1698, patented the first crude steam engine, based on Denis Papin's Digester or pressure cooker of 1679.

Thomas Savery had been working on solving the problem of pumping water out of coal mines, his machine consisted of a closed vessel filled with water into which steam under pressure was introduced. This forced the water upwards and out of the mine shaft. Then a cold water sprinkler was used to condense the steam. This created a vacuum which sucked more water out of the mine shaft through a bottom valve.

Thomas Savery later worked with Thomas Newcomen on the atmospheric steam engine. Among Savery's other inventions was an odometer for ships, a device that measured distance traveled.

Thomas Newcomen (1663-1729)
Illustration of Thomas Newcomen's Engine circa 1712

Thomas Newcomen was an English blacksmith, who invented the atmospheric steam engine, an improvement over Thomas Slavery's previous design.

The Newcomen steam engine used the force of atmospheric pressure to do the work. Thomas Newcomen's engine pumped steam into a cylinder. The steam was then condensed by cold water which created a vacuum on the inside of the cylinder. The resulting atmospheric pressure operated a piston, creating downward strokes. In Newcomen's engine the intensity of pressure was not limited by the pressure of the steam, unlike what Thomas Savery had patented in 1698.

In 1712, Thomas Newcomen together with John Calley built their first engine on top of a water filled mine shaft and used it to pump water out of the mine. The Newcomen engine was the predecessor to the Watt engine and it was one of the most interesting pieces of technology developed during the 1700's.

The Ambarawa Railway Museum

The museum was established in the 1970s primarily to preserve a wide selection of the steam locomotives which were then coming to the end of their useful lives on the 3ft 6in (1067mm) gauge railways of the Indonesian State Railway (the then Perusahaan Negara Kereta-Api, PNKA). These are parked in the open air next to the original station, originally a transhipment point between the 4ft 8½in gauge branch from Kedungjati to the north-east and the 3ft 6in gauge line onward towards Yogyakarta via Magelang to the south. It is still possible to see that the two sides of the station were built to accommodate different size trains.

Ambarawa lies some way above sea level and was an administrative centre for the Dutch colonialists. It is now a popular area for local tourists, particularly with the nearby hill station of Bandungan and the Hindu-Buddhist temples at Gedong Songo. Foreign tourists pass through the area particularly in conjunction with visiting the Buddhist temple at Borobudur. Hence the museum is well situated and its development into a world class site is not only desirable but feasible with the right kind of backing. Currently it is still part of the State Railway who have supported it to the best of its ability since formation although funding has never been generous.

THE WORKING OF STEAM LOCOMOTIVE

The workings of a steam locomotive